Belt construction

Elevator Belting

Low-elongation textile or steel-reinforced carcasses for vertical bucket-elevator systems.

Product overview

Built around the duty.

Elevator belts carry bucket loads vertically and require a carcass with controlled elongation, strong bolt retention and consistent tracking behaviour. Multi-ply textile, steel-cord and combined constructions are selected around lift, bucket load and pulley geometry.

Carcass optionsMulti-ply, steel cord or combination

Key behaviourLow elongation

ConnectionBucket fixing pattern by design

Selection basisLift, load and pulley geometry

Construction & selection

What defines this product.

Multi-ply or steel-reinforced carcass
Controlled elongation
Bolt-holding capability reviewed with bucket arrangement
Construction selected for lift and dynamic loading

Typical applications

Where it fits.

01Bucket elevators
02Cement and grain handling
03Mineral processing
04Vertical bulk-material transport

Available configurations

Configure the construction.

01
Multi-ply textile carcass
02
Steel-cord or steel-reinforced construction
03
Solid-woven construction for selected duties
04
Pre-punched supply against an approved pattern where required

Selection inputs

What we need to confirm.

01
Vertical lift and bucket load
02
Bucket spacing, bolt pattern and fixing method
03
Pulley diameters and belt speed
04
Take-up allowance and operating elongation
05
Material temperature and cover requirement

Specification note

Bucket and hole patterns should be confirmed from the final elevator and bucket drawings. Pre-punching should only follow an approved dimensional layout.

Need help specifying a belt?

Send us your conveyor details.

Request technical input